Enduro
Electrophoresis Gel System
Enduro Horizontal Gel Boxes have been designed
for ease of use, safety and durability. A variety of sizes are
available, from a mini gel system to a large maxi gel system
that can accommodate as many as 450 samples in a single run. A
wide range of accessories are available to customize your
system, including multichannel compatible gel combs.
QUALITY CONSTRUCTION -
The Enduro gel tanks are molded for leakproof
performance and a long service life. The corrosion resistant
platinum electrodes are located in cassettes to protect them
during cleaning and provide for easy replacement. The lids fit
on the gel boxes in only one direction. A drip ring on the lid
recycles condensed buffer and prevents it from dripping directly
onto the gel.
EASE
OF USE -
Casting gels for the Enduro system is very easy.
Simply snap the rubber gates onto the ends if the tray, place
the comb in position and pour the gel - no taping is necessary.
Slots on the sides of the gel trays hold the combs in place. The
two piece combs are designed so that the teeth can be raised or
lowered to vary the depth of the well within the gel. The
supplied combs are 1.5 mm thick. Combs of other thicknesses are
available separately. After the gel has hardened, the combs and
gates are removed and the gel and tray placed in the gel box.
Loading strips may be placed on the bottom of the gel box to aid
in well visualization. Gel trays are UV transparent.
DESIGNED FOR SAFETY -
The power leads for the Enduro system are
attached to the gel box lid. The connection with the electrodes
is made only when the lid is properly in place. Removal of the
lid removes power from the system. Side tabs and pressure pads
make lid removal easy and prevent sloshing of buffer.
